188博金宝

欢迎访问188博金宝官方网站,我们是一家体育运动设施施工承包资质企业!

贵州塑胶跑道厂家

188博金宝:新闻分类

188博金宝:联系我们

188博金宝 

手机:13608576666 

手机:13985135888

座机:0851-85982398

网址:www.gzfyty.com 

地址:贵州省贵阳市观山湖区中天会展城101大厦A座37楼1-5号


浅谈塑胶跑道涉"毒" 这些"毒"到底从何而来

您的当前位置: 贵州塑胶跑道 >> 新闻中心 >> 技术知识

188博金宝:浅谈塑胶跑道涉"毒" 这些"毒"到底从何而来

188博金宝: 发布日期:2017-12-26 作者:贵州塑胶跑道 点击:

浅谈塑胶跑道涉"毒" 这些"毒"到底从何而来

贵州塑胶跑道

Talking about the "poison" of the "poison" in the plastic runway

罪魁祸首或许是含苯添加剂

The culprit may be a benzene additive

既然如此,那么问题出在哪里?怪味又来自何方?华东理工大学运动场地合成材料检测中心是国内为数不多的相关检测实验室之一。该中心工作人员介绍,怪味一般可能是塑胶跑道里面的溶剂造成的,而这些溶剂则是在胶水里面。如果有的厂家操作不太规范,使用溶剂比较多,挥发时间肯定就比较长。

In that case, where is the problem? Where the smell comes from? The sports site synthetic material testing center of East China University of Science and Technology is one of the few related testing laboratories in China. The center staff, the general taste may be caused by the solvent inside the plastic runway, which is in the inside glue solvent. If some manufacturers do not operate too standard, the use of solvents is more, the time of volatilization must be longer.

用于铺设贵州塑胶跑道厂塑胶跑道的胶水。

It is used to lay the glue of plastic runway in Guizhou plastic runway factory.

贵州塑胶跑道">贵州塑胶跑道厂塑胶跑道

Plastic runway in Guizhou plastic runway factory

而这些“溶剂”,国标并无相关规定。如果跑道使用了劣质塑胶颗粒,为了铺平整,就会添加苯作为稀释剂,含苯添加剂会造成皮肤瘙痒、头晕等症状。部分企业在施工中为了追求速度,让跑道迅速“干”起来以便使用,还会添加铅盐促进跑道凝固定型,这对环境、人体都有毒害。

And these "solvents", the national standard has no relevant regulations. If the runway uses inferior plastic particles, it will add benzene as diluent to smooth the surface. Benzene additive will cause skin itching and dizziness. In order to speed up the construction and make the runway quickly "dry" for use, some enterprises will also add lead salts to accelerate the solidification of runway, which is toxic to the environment and human body.

这说明,毒跑道主要是产生于施工阶段,塑胶跑道本身并无问题。

This shows that the toxic runway is mainly produced in the construction stage, and the plastic runway itself has no problem.

塑胶跑道公司压价也是厂商偷工减料的原因

The price of the Plastic track company is also the reason for the manufacturer to cut down the work

为什么会出现这样的问题?一方面当然与某些不良厂商有关,对此要进行严厉打击,但另一方面客观上也有压价的问题。记者对一些厂商进行调查后也发现,因为成本问题,偷工减料成为一些厂商的惯常那个做法。江苏的唐老板曾经营一家弹性材料生产公司多年,他透露,20年前生产一平方米塑胶跑道能卖150元以上,如今人工成本飞涨,但塑胶跑道的采购单价反而降到每平米90元到120元。因此,一些不良厂家靠偷工减料来压缩成本,问题跑道“应运而生”。唐老板还坦言,质量要得到保证的话比较困难,因为价格实在太低。

Why is there such a problem? On the one hand, of course, it is related to some bad manufacturers, which should be dealt with severely, but on the other hand, there is a problem of price pressure. After investigating some of the manufacturers, the reporter also found that because of the cost problem, it became the usual practice of some manufacturers. Tang boss of Jiangsu once ran an elastic material production company for many years. He revealed that 20 years ago, the production of one square meter plastic racetrack could sell for more than 150 yuan. Now the labor cost is soaring, but the purchase price of plastic runway has dropped to 90 yuan to 120 yuan per square meter. Therefore, some bad manufacturers rely on cutting down to reduce the cost, the problem runway "arises at the historic moment". Tang also said that the quality to be guaranteed is more difficult, because the price is too low.


188博金宝:本文网址:/news/497.html

188博金宝:相关标签:贵州塑胶跑道

最近浏览:

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
邮箱
邮箱
地址
地址
188博金宝-188博金宝官方网站